Description
How to Use Canna Coco Nutrient A&B
Canna Coco Nutrient can be used right the way through your grow. Fill your recirculating hydroponic system reservoir with water and add equal amounts of Canna Coco Nutrient Part A and Canna Coco Nutrient Part B to the tank to achieve the required strength and mix well. Use 2-4ml per litre (CF of 12-23) of both part A and part B.
Use 2ml per litre for small light-feeding plants and 4ml per litre for larger heavy-feeding plants. The size and vigour of your plants will also affect how frequently they should be watered. As a guideline, 3 feeds per day achieving 10%-20% run-off per feeding works very well. We recommend using a syringe or beaker for accurate measurement of this product and a CF/EC/PPM meter such as the Bluelab Truncheon to check the nutrient strength.
Adjust as necessary. Next, add any additives and boosters you wish to use and again mix well. Adjust the pH of the solution to the required level using pH up or down as necessary. We recommend the use of a pH meter such as the Horticare pH meter to help accurately set the pH to the required level. If Canna Coco nutrient is used in a hydroponic system it is recommended you renew the nutrient solution in your reservoir every 7 days.
Both parts of two-part nutrients are designed to be used together in equal amounts. Using only part A or part B, or using them in unequal amounts will result in a nutrient solution which is not properly balanced. This will almost certainly lead to your plants suffering from deficiencies.
As with all nutrients, boosters and additives, never mix them together in their concentrated form (i.e. straight out of the bottle). Always add each nutrient, booster or additive to your reservoir or feed water in turn, giving the solution a good stir to mix it in before adding the next one.
Recommended dosage: 2 – 4ml per litre each of both Parts A & B
Recommended CF range: 12 – 23
Recommended pH range: 5.5 – 6.2
Canna Coco A&B Combined NPK: 5-4-3
